The best way to Paint Cupboards Using a Foam Brush
The keys to your tough and beautiful paint-job are correct surface preparation, a top quality paint and paint program that is cautious. Select the highest-quality paint available that’s 100% acrylic. Lower- quality paints include fillers and acrylic, and such products ultimately remove or become scratched with use. A foam brush is disposable and simplifies the painting method. Paint is quickly absorbed by this brush, and its own molded corners give precision to you paneled characteristics of the cabinet and when painting the corners.
Remove the cabinet doors in the cupboard. Remove the components from your doors and reserve.
Pour tri-sodium phosphate right into a bucket in a well-ventilated area or outside. Dip the rag in the bucket and scrub door and the cabinet. Allow door and the cabinet to dry.
Sand door and the cabinet with sandpaper to roughen the area somewhat. Wipe the particles that is sanding together with the tack cloth.
As this produces bubbles the paint primer together with the paint stirrer, but prevent stirring.
Dip the foam brush to the primer to completely saturate three fourths of the brush with primer. Saturating the brush can cause cause the primer to drive out any air bubbles hiding inside the foam materials. Lightly flick the brush on the primer can to eliminate drips. Don’t scrape the brush or bubbles may be introduced by you also to the brush.
Wipe door and the cabinet with all the brush with long, easy strokes in the same course. When painting the cupboard door, paint the stile, after which the rail first. Paint the big flat area of of the do-or last. Don’t press the brush onto the area, or bubbles will be created by the brush on the area. Allow to dry according to the directions of primer manufacturer’s.
Stir the paint using a paint stirrer. Again, avoid stirring as bubbles are created by this.
Dip the foam brush to the paint to completely saturate three fourths of the brush with paint. Lightly flick the brush on the paint can to eliminate drips. Don’t scrape the brush or bubbles may be introduced by you also to the brush.
Wipe door and the cabinet with all the brush with long strokes. Don’t stroke the brush back and forth and don’t overlap a damp brush on the edges of an area that is dried, as this generates lap marks. Again, don’t press the brush as this can really leave bubbles on the area that is cabinet. Allow to dry according to the directions of paint manufacturer.
Allow door and the cabinet to entirely dry. Apply still another layer of paint and permit to dry. Allow the paint as stated by the paint producer guidelines before utilizing the cupboard or to cure for a T least 2 4 hrs.
Reattach the components and hang the do-or to the cupboard.