How to Convert Sprinkler Systems to Drip Irrigation
A typical lawn sprinkler system loses a great deal of water to end and evaporation as the spray goes through the atmosphere. To conserve water and save money at exactly the same time, you should think about installing a drip irrigation system. Ideal for flowerbeds, shrubs and trees, drip irrigation utilizes arranged tubes along the ground to water plants directly at their roots. A preexisting sprinkler system allows you to use the current sprinkler heads as conversion points for the new drip system.
Locate the sprinkler heads in your lawn. Determine which heads need to be capped away or converted. Insert hardwood stakes into the ground beside each sprinkler. Mark each wager using the terms “drip” or “cap” with a marker. Verify that every sprinkler head is correctly marked before conversion.
Verify your safety system is in the “off” place. Turn off any automatic controls while you work on the arrangement.
Remove the sprinkler heads marked “cap” by hand-turning the spray assemblies off of the risers. Attach a sprinkler cap on every empty riser. Verify that every cap is tight enough to prevent water leakage.
Remove the sprinkler heads marked “drip” by hand turning the spray assemblies off of the risers. Attach a drip supply manifold onto every empty riser. Confirm that every manifold is tight.
Attach polyethylene tube onto every supply manifold’s fitting with your hands. Verify that the tubing effortlessly fits about each fitting. Water should not leak from any link point.
Arrange the tubing length along the ground. Press an emitter to the holes along the tubing until every one clicks into position. The emitters should confront the main foundation of crops requiring irrigation.
Turn your sprinkler system back on at the main water source. Notice the drip irrigation in action. No leaks or water spray ought to be found from the capped or converted sprinkler heads.