The best way to Replace Material Window Shades
Fabric blinds will add style. Blinds open in the bottom to the best, although curtains and drapes open from side to side. An stitching technique that produces a gap approach with buttons will provide replacements that are fashionable to worn-out cloth blinds. Fabric blinds could be co-ordinated to the décor of any room and create a contemporary and smooth look.
Measure width and the height of the window shade that is old together with the tape measure and include 1/2 inch to The measurement to find out the quantity of material yardage required for the material window shade.
Cut two pieces of material and stack them on top of every other using the rights sides of the materials facing each other.
Cut three pieces of 1/4 inch wide tape into a length of 3″ each. Fold each piece of tape in two. Position the bits of tape in addition to the edge of the material items that were stacked spaced .
Pin the edges of the two pieces of material with the pins that are straight, integrating the pieced of tape.
Sew a seam to link the two materials 1/4 inch from the edges with a sewing-machine, leaving a 6 inch area unsewn. Turn the shade to the side that is correct. Hand sew the opening closed, using thread and a needle. Press the shade edges flat with the iron.
Sew one-line of stitching 2″ over the width, in the edge of the cloth shade. Sew another line of stitching 2″ below the first-line to produce a-rod panel.
Remove the stitching in the edges of the rod panel using a seam-ripper. The edges to hand and the panel stitch them in place together with thread and the needle.
Measure the peak of the window shade and divide it marking lines that are mild having a pencil. Sew three buttons spaced to correspond a-T the third area lines together with thread and the needle. The tape will undoubtedly be utilized for opening a T two diverse ranges to button the cloth shade.
Insert the spring pressure rod in the rod pocket and hang the replacement material shade.