The Way to Paint a Brick Building
There is a fantastic chance it has brick-faced walls, if your house was constructed anytime from the 1880s to the 1940s — and with the colour and character of the architecture of San Francisco, a plain brick facade may feel a bit unadventurous. Painted brick requires more upkeep than bare or whitewashed walls, but it provides more choices for ways to you to personalize your property. Brighten up a dark building with a couple coats of a color, or capture the vibrant soul using an magenta of San Francisco.
Move anything or in danger of getting sprayed with paint. Cover things which you can’t move, like windows or shrubbery, with sheets or drop cloths.
Pressure wash the exterior of the building at 1,500 to 2,000 psi. For your paint job to be even and durable, the bricks have to be clean before you begin. Clean stains and efflorescence deposits, the powder that occasionally appears on brick surfaces, by employing a solution of warm water and laundry detergent into a scrub brush and scrubbing the bricks clean. Scrape any peeling paint using a putty knife if your building has been painted in the past.
Allow the building to dry. It requires at least three days to dry, because brick is porous.
Apply premixed acrylic mortar patch into some crumbling mortar. Use the area to be squeezed by a mortar patch gun to the mortar gaps. Fill cracks in the brick and gaps around doors and trim using caulk. Allow the mortar stains and caulk to dry.
Prime the walls using a primer specially formulated for use on bare brick (or painted brick, or if your building has been currently painted). Use the primer then smooth it with rollers and brushes. Use brushes to cover. Follow the directions of the manufacturer regarding how many coats to use and how long to let the primer dry.
The building the way you primed it, utilizing a blend of brushes, spray and rollers. Make certain every inch of brick is covered in paint, leaving no cracks or crannies. Use a paint. Apply additional coats.