The Way to Refinish a Dining Table and Chairs in an Off-White Distressed Appearance
Make your dining room table and chairs appear aged and worn out with painting and distressing the furniture. Paint them off-white to provide a touch of shabby-chic or cottage style to them. After it is distressed, the existing finish, if or painted of the furniture, reveals through the paint.
Cover the work area with paper or a tarp’s floor. Set and seats.
Remove the cushions if they have some. Push on the cushioned seat bottoms out from underneath or unscrew them. If you’re unable or reluctant to remove the chair cushions, cover them with paper secured with painter’s tape to keep the cushions dust- and – paint-free.
Whack regions of the dining table and seats using a hammer to create dings and dents, including a distressed appearance to the furniture. Put a small number of nuts and bolts and fold the weight making dents. If you want to not measure the furniture while dings and dents are part of a distressed finish, skip this step.
Sand seats that you wish to refinish employing a fine-grit sandpaper and all areas on the dining table. Make it more receptive to paint and sand just enough to scuff the finish up. Wipe the dust away with a rag. Use a duster to find some of the dust off the coated fabric regions on the seats, if necessary.
Spray candle wax or paraffin over surfaces that get the most wear on the dining table and seats, such like the edges and corners of this table, the chair edge (if it is wooden and not a cushion), the chair back and the rungs under the chair. It makes the paint easier to eliminate for a finish, although the wax is discretionary.
Open and stir the off-white latex paint. Pour of it into a paint tray.
So the chair section faces down; then flip the seats use a paintbrush to paint the chair legs and trim the chair around — some surfaces not resting on tarp or the paper. Paint edges and the dining table legs . If you want to not crouch down to paint the legs, flip the table. Allow the paint to dry completely.
Reposition table and the chairs to reach areas the table, in addition to previously inaccessible. Paint them and allow the paint to dry completely. Inspect the furniture and paint any areas that require protection that is better, allowing the paint to dry completely.
Sand the painted regions employing sandpaper, focusing the majority of your efforts on regions coated with wax. Sand until the paint comes in regions that would get the most wear both the table and the seats. Wipe down the pieces with a soft, clean rag to remove the dust.